Europower Pmp3000 Mixer Manual

 admin
Europower Pmp3000 Mixer Manual 7,0/10 6954 reviews

The Behringer PMH3000 Europower Powered Mixer has 16 channels (8 mono + 4 stereo), plus stereo tape returns, 2 monitor paths, and extremely flexible I/O options. The 2x400W (800W bridged mode) CoolAudio amplifier will easily handle a large audience for live music. Incredible sonic performance and super-light weight delivered in an ultracompact mixer that is nearly half the weight of conventional powered sound mixers.
Adding to the list of Behringer 'big-mixer' features are: XPQ 3D surround sound effect, integrated Voice Canceler which removes vocals for karaoke applications, stereo 7-band graphic EQ with FBQ feedback detection, dual 12-segment LED output level meters and faders for precise level control of mono, main 1, and monitor 1 and 2 buses. The integrated mono output can be used to feed an external subwoofer. Stereo power amp inserts and phones/ctrl R output with dedicated level control for headphones or powered monitors are also onboard.
8 balanced low-impedance mic inputs with state-of-the-art IMP 'invisible' mic preamps, low-cut filter and additional channel inserts plus balanced high-impedance line inputs for direct connection of line sources or high-output instruments. Full-featured channel strips include input level trim controls, signal and clip LED indicators, dual monitor sends, FX sends, mute and PFL functions, plus high-quality 60mm logarithmic faders for exact level control. Mono channels also include low-cut filters, inserts for connecting external processors and A/B switching for selecting the 1/4' TRS or RCA input connectors on channels 9”12. The dedicated CD/tape input allows you to connect a line-level stereo source so you can play music during your breaks without having to change the fader positions and lose your mix. The super-rugged carrying handle makes it easy to transport while professional Speakon connectors ensure outstanding performance and reliable connection.

Behringer Europower Pmp3000 Mixer User Manual DOWNLOAD HERE. Behringer europower pmp3000 mixer User ManualDownload the Official User Manual This is it, you have found the Official User Manual for.

Features

  • Super-compact 2x400W (800W bridged mode) stereo powered mixer
  • Revolutionary and patented CoolAudio Amplifier Technology: Enormous power, incredible sonic performance, and super-light weight
  • Ultracompact dimensions at nearly half the weight of conventional powered mixers means no more lugging around dead weight
  • 16-channel mixer section comprised of 8 mono and 4 stereo channels plus separate tape returns
  • Integrated 24-bit stereo FX processor with 99 outstanding Virtualizer presets including reverb, delay, chorus, flanger, and more
  • Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies for easy feedback removal
  • 8 high-quality IMP 'Invisible' Mic Preamps with switchable +48 V phantom power for condenser microphones
  • Effective, extremely musical 3-band EQ, switchable low cut filter and clip LEDs on all mono channels
  • Stereo 7-band graphic EQ allows precise frequency correction of monitor or main outputs
  • Voice Canceler function removes singer's voice from recordings for Karaoke applications
  • Selectable stereo (main L/R), double mono (main/monitor) or bridged mono amplifier operation mode
  • Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
  • Adjustable stereo CD/tape input for connecting external signal sources
  • Multifunctional stereo preamp outputs for added flexibility
  • Internal switch-mode power supply for maximum flexibility (100 - 240 V), noise-free audio, superior transient response and lowest possible power consumption
  • Extremely rugged construction ensures long life even under the most demanding conditions
  • Designed in Germany
  • Manufactured under ISO9000 certified management system
Pro Coverage

Quick Start Guide (Check out behringer.com for Full Manual) EUROPOWER PMP2000. 800-Watt 14-Channel Powered Mixer with Multi-FX Processor. EUROPOWER PMH1000/PMH3000/PMH5000 FOREWORD Dear Customer, Welcome to the team of EUROPOWER users and thank you very much for expressing your confi-dence in BEHRINGER products by purchasing this power mixer. It is one of my most pleasant tasks to write this letter to you, because it is the culmination of many months of hard work delivered by our. Find many great new & used options and get the best deals for Behringer Europower Pmp1000 Powered Mixer at the best online prices at eBay! Free shipping for many products!

  1. Behringer Europower PMP3000 Manuals For additional information, see the Global Manuaal Program terms and conditions – opens in a new window or tab. An active speaker does not require an amplifier and will work direct from a mixer as the amplifier is built into the speaker box.
  2. 4 EUROPOWER PMP1680S/PMP980S/PMP960M User Manual 1. Before you get Started 1.1 Shipment Your PMP mixer was carefully packed at the factory and the packaging is designed to protect the unit from rough handling.
Manufacturer's Warranty
1 year warranty. 3 year warranty if registered within 90 days of purchase.

Behringer-Europower-Pmp2000-Owners-Manual behringer-europower-pmp2000-owners-manual

Behringer PMP2000 User Manual PMP2000_P0611_M_EN Behringer - PMP2000 - User Manual

Behringer PMP2000 User Manual pmp2000_p0611_m_en Behringer - PMP2000 - User Manual

Behringer PMP2000 User Manual pmp2000_p0611_m_en Behringer - PMP2000 - User Manual

: Behringer Behringer-Europower-Pmp2000-Users-Manual-752257 behringer-europower-pmp2000-users-manual-752257 behringer pdf

Gta san andreas free direct download pc. Open the PDF directly: View PDF .
Page Count: 12

  • 1. Introduction
    • 1.1 Before you get started
  • 2. Control Elements
  • 4. Installation
EUROPOWER PMP2000
800-Watt 14-Channel Powered Mixer with Multi-FX Processor
Table of Contents
Thank you ....................................2
Important Safety Instructions ...................3
Legal Disclaimer ...............................3
Limited warranty ..............................3
1. Introduction ................................5
1.1 Before you get started ........................... 5
1.1.1 Shipment .....................................5
1.1.2 Initial operation ...............................5
1.1.3 Online registration ............................ 5
2. Control Elements ............................5
2.1 Front panel ......................................5
2.2 Rear panel ....................................... 6
3. Eects Processor ............................7
4. Installation .................................7
4.1 Mains voltage ....................................7
4.2 Mains connection ................................7
4.3 Audio connections ...............................7
4.4 Loudspeaker connections ........................8
5. Wiring Examples ............................8
6. Specications ...............................9
Congratulations! With the PMP2000 you have acquired a state-of-the-art
14-channel power mixer that sets new standards. Right from the start, our goal
has been to design a revolutionary device that can be used for a great variety of
applications. And indeed, this overwhelming power mixer gives you plenty of
functionality and a broad range of connection and expansion options.
Important Safety
LEGAL DISCLAIMER
Terminals marked with this symbol carry
to constitute risk of electric shock.
Use only high-quality professional speaker cables with
¼' TS or twist-locking plugs pre-installed. Allother
installation or modication should be performed only
This symbol, wherever it appears,
dangerous voltage inside the
enclosure-voltage that may be sucient to constitute a
This symbol, wherever it appears,
maintenance instructions in the
Caution
remove the top cover (or the rear section).
No user serviceable parts inside. Refer servicing to
Caution
do not expose this appliance to rain and
moisture. The apparatus shall not be exposed to dripping
or splashing liquids and no objects lled with liquids,
Caution
by qualied service personnel only.
Toreduce the risk of electric shock do not perform any
servicing other than that contained in the operation
Europower Pmp3000 Mixer Manual
instructions. Repairs have to be performed by qualied
1. Read these instructions.
3. Heed all warnings.
5. Do not use this apparatus near water.
7. Do not block any ventilation openings. Install in
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. Ifthe
provided plug does not t into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
11. Use only attachments/accessories specied by
12. Use only with the
or table specied by the
the apparatus. When a cart
moving the cart/apparatus
injury from tip-over.
13. Unplug this apparatus during lightning storms or
14. Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or has
15. The apparatus shall be connected to a MAINS socket
16. Where the MAINS plug or an appliance coupler is
used as the disconnect device, the disconnect device shall
TECHNICAL SPECIFICATIONS AND APPEARANCES
ACCURACY IS NOT GUARANTEED. BEHRINGER,
ARE PART OFTHE MUSIC GROUP MUSICGROUP.COM.
RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO
BY ANY PERSON WHO RELIES EITHER WHOLLY OR
OR STATEMENT CONTAINED HEREIN. COLORS AND
MUSIC GROUP PRODUCTS ARE SOLDTHROUGH
FULLFILLERSAND RESELLERS ARE NOT AGENTS OF
UNDERTAKING OR REPRESENTATION. THIS MANUAL
BE REPRODUCED ORTRANSMITTED IN ANY FORM
INCLUDING PHOTOCOPYING AND RECORDING OF ANY
WRITTEN PERMISSION OF MUSICGROUPIPLTD.
© 2013 MUSICGroupIPLtd.
Road Town, Tortola, British Virgin Islands
and additional information regarding MUSIC Group’s
Limited Warranty, please see complete details online at
(27)
(17)
(29)(30) (31)
(20)
(22)
(19)
(23)
(16)
(2)
(4)
(6)
(9)
(8)
(13)
Mono channel
phantom power switch
Main Section
(33) (35)(34)(39)
1.Introduction
BEHRINGER is a company with its roots in professional recording studio
technology. For many years now we have been successful in developing products
for studio and live use. These include microphones and 19' devices of all kinds
(compressors, enhancers, noise gates, tube processors, headphone ampliers,
digital eects devices, DI boxes, etc.), monitor and P.A. speakers and professional
live and recording mixers. Our entire technical know-how has gone into
◊ This manual first describes the terminology used, so that you fully

Europower Pmp3000 Mixer Manual Pdf

understand the PMP2000 and its functions. Please read the manual
1.1Before you get started
Your PMP2000 was carefully packed at the factory and the packaging is designed
to protect the unit from rough handling. Nevertheless, we recommend that
you carefully examine the packaging and its contents for any signs of physical
◊ If the unit is damaged, please do NOT return it to BEHRINGER,
but notify your dealer and the shipping company immediately.
Otherwise, claims for damage or replacement may not be granted.
Be sure that there is enough space around the unit for cooling and, to avoid
overheating, please do not place the PMP2000 near radiators etc.
◊ Before you connect the PMP2000 to the mains, please make sure that
the voltage setting on the unit matches the local voltage!
◊ If you set the unit to a different mains voltage, be sure to use a fuse
of the correct type and rating. Please refer to the “Specifications”
◊ Blown fuses must be replaced by fuses of the same type and rating!
The mains connection is made using the enclosed power cord and a standard IEC
receptacle. It meets all of the international safety certication requirements.
◊ Please make sure that all units have a proper ground connection.
For your own safety, never remove or disable the ground
conductor from the unit or of the AC power cord. The unit shall
always be connected to the mains socket outlet with a protective
To avoid damage on the device, do not
• connect the loudspeaker outputs to each other
• connect the loudspeaker outputs to those of other ampliers
The sound quality may diminish within the range of powerful broadcasting
stations and high-frequency sources. Increase the distance between the
transmitter and the device and use shielded cables for all connections.
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
Pmp3000
Should your BEHRINGER product malfunction, it is our intention to have it
repaired as quickly as possible. To arrange for warranty service, please contact
the BEHRINGER retailer from whom the equipment was purchased. Shouldyour
BEHRINGER dealer not be located in your vicinity, you may directly contact
one of our subsidiaries. Corresponding contact information is included in the
original equipment packaging (Global Contact Information/European Contact
Information). Should your country not be listed, please contact the distributor
nearest you. A list of distributors can be found in the support area of our website
Registering your purchase and equipment with us helps us process your repair
Thank you for your cooperation!
2.1Front panel
Your EUROPOWER PMP2000 comes with 14 input channels, which only dier
in terms of pad switch, peak LED and interface panel. Since the EQ, eect,
monitorand level controls are identical on all channels, they will be described
(1) The FX control determines the signal level that is routed from the respective
◊ Please note that the effects processor is muted as long as the
FX TO MAIN control ((22)) is set fully counter-clockwise.
(2) The HIGH control in the EQ section governs the high frequencies of the
(3) Use the MID control to boost/cut the mid range.
(4) The LOW control allows you to raise or lower the bass frequencies.
(5) The MON control determines the channel’s volume assigned to the
(6) Use the LEVEL control to set the volume level of the respective channel.
(7) Use the CLIP LED to ensure that the input gain is set properly. The CLIP LED
should light up only with peak signals, but never all the time.
(8) The PAD button reduces the channel input sensitivity by 25 dB. Thus, you
can also connect high-level line signals to the respective channel input.
(9) This HI-Z/LINE input can be used to connect line level signal sources, such as
(10) This is the channel’s balanced XLR microphone input.
(11) The stereo line input of channels 7 - 12 can be used to connect, for example,
keyboards with stereo outputs or a stereo drum computer.
◊ Please remember to use either the microphone or the line input on a
specific channel. Never use both at the same time. This rule applies to
◊ When you connect a mono line signal to channels 7 - 12, please always
use the left input. The mono signal will then be reproduced on both
(12) The CD/TAPE/LINE IN RCA input of channel 13/14 allows you to feed in
external stereo signals from your CD player or tape deck, for example.
(13) The CD/TAPE/LINE OUT RCA output provides the stereo main mix signal of
your PMP2000 and can be routed to, say, a recording machine.
◊ When the CD/TAPE OUT signal is connected to a tape deck whose output
signal is routed back to the CD/TAPE IN on the PMP2000, feedback can
be produced as soon as you start recording. Be sure to interrupt the
(14) The phantom power supply provides the voltage necessary for the operation
of condenser microphones. Use the PHANTOM POWER switch to activate
the supply together for channels 1 - 12 (XLR connector). The LED above the
(15) This is the PMP2000’s graphic stereo equalizer, which comprises two units
and can be used to adapt the sound to the room acoustics.
• The stereo equalizer is eective on the main mix when both units have been
activated with the EQ IN buttons (16) and the MODE switch (21) is set to its
• The stereo equalizer uses one unit each to process the main and monitor
mix signals, if both units are on and the MODE switch (21) is set to its lower
(16) Use the EQ IN buttons to switch the two equalizer units on or o.
(17) Press the RUMBLE FILTER button to activate the low-cut lter of
channels 1 - 6. This lter eliminates unpleasant bass frequencies
(18) The FX TO MON control determines the eects intensity of the multi-eects
processor as part of the monitor mix. Turn the control fully counter-clockwise
(19) The MONITOR LEVEL control adjusts the volume of the monitor mix.
(20) Use the MONITOR LEVEL display to control the monitor signal level.
The upper LED (LIM) lights up when the built-in limiter is activated,
(21) With this MODE switch you can determine whether the PMP2000 works as a
stereo amplier (“LEFT/RIGHT”) or as a dual mono amplier (“MON/MAIN”).
Please note that the equalizer function also depends on this switch setting
(22) The FX TO MAIN control functions as FX return for the built-in eects
processor. Use this control to add the desired eect signal to the main mix.
No eect signal is added when the FX TO MAIN is set fully counter-clockwise.
(23) The MAIN LEVEL control governs the overall volume of the PMP2000.
(24) The MAIN LEVEL display reads the output level of the PMP2000. The upper
LED (LIM) lights up when the built-in limiter is activated, thus protecting
(25) Use the FX FOOTSW(itch) jack to connect any commercially available foot
controller. It allows you to bypass the eects unit.
(26) This is the balanced MONITOR output of your PMP2000. Use it to feed an
(27) These two ¼' TS jacks allow you to route the output signal to an external
amplier. This allows you to, say, use only the mixing and eect section of
the PMP2000. The signal is taken pre-power amp. Of course, you can also use
(28) These two ¼' TS jacks can be used to connect external signals, such as the
main mix signal from an additional mixing console (pre-power amp).
(29) Here, you will nd a list of all multi-eect presets available.
(30) This is the LED level meter of the eects processor. Please make sure that the
clip LED lights up with signal peaks only. If it is lit constantly, this indicates
that the eects processor is overdriven, which can lead to unpleasant
(31) The Eect display reads the currently selected preset.
(32) Turn the PROGRAM control to select the eect presets. Press the control
2.2 Rear panel
(33) The mains connection is on a standard IEC receptacle. An appropriate power
(34) FUSE HOLDER. Before connecting the unit to the mains, ensure that the
voltage setting matches your local voltage. Blown fuses should only be
(35) Use the POWER switch to put your PMP2000 into operation. The POWER
switch should always be in the “O ” position when you are about to connect
◊ Attention: The POWER switch does not fully disconnect the unit from
the mains. Unplug the power cord completely when the unit is not used
(36) This is the RIGHT/MONO MAIN loudspeaker output of your PMP2000,
whereyou can connect the right loudspeaker of a stereo system. For this
purpose, switch (21) must be set to its upper position. If, however, you run
a mono main mix (switch (21) set to its lower position), this loudspeaker
◊ The impedance of the loudspeaker connected here must not fall
(37) The BRIDGE loudspeaker output allows you to combine the left and
right stereo channel in one mono output, which is useful for applications
that require the use of one loudspeaker only. To use the BRIDGE output,
◊ Always connect the BRIDGE jack to a loudspeaker with a minimum
◊ Please note that the power delivered to the speaker connected to
the BRIDGE output is considerably higher than the power provided to
the speakers wired to the parallel speaker outputs. Please read the
information given on the rear panel of your PMP2000.
◊ When using the BRIDGE loudspeaker output, NEVER use any of the
other two connectors (RIGHT/MONO MAIN and LEFT/MONITOR) at the
(38) This is the LEFT/MONITOR loudspeaker output of your PMP2000, to which
you can connect the left loudspeaker of a stereo system (switch (21) set to
its upper position). If you do a main mix in mono (switch (21) set to its lower
position), this loudspeaker output provides the monitor signal in mono.
◊ The impedance of the loudspeaker connected here must not fall
◊ Information on how to properly connect your speaker with regard to
polarity can be found on the rear of the unit (PIN assignment).
3. Eects Processor
This built-in eects module produces high-grade standard eects such as
reverb, chorus, anger, delay and various combination eects. The integrated
eects module has the advantage of requiring no wiring. This way, the danger
of creating ground loops or uneven signal levels is eliminated at the outset,
completely simplifying the handling. These eect presets are designed to be
added to dry signals. If you move the FX TO MAIN/MON control, you mix the
◊ Turn down the FX controls in those channel strips whose signals you
4. Installation
Before connecting the PMP2000 to the mains, please carefully check that your
equipment is set to the correct voltage! Blown fuses must be replaced by fuses of
4.2 Mains connection
The mains connection is made using the enclosed power cord and a standard IEC
receptacle. It meets all of the international safety certi cation requirements.
◊ Please make sure that all units have a proper ground connection.
For your own safety, never remove or disable the ground conductor
4.3 Audio connections
The in and outputs of your BEHRINGER PMP2000 are designed as unbalanced
¼'mono jacks—except for the mono channel line inputs, which come as
balanced ¼' stereo jacks. Of course, all in and outputs work with both balanced
and unbalanced connectors. The tape ins and outs are on stereo RCA connectors.
◊ Please ensure that only qualified personnel install and operate the
PMP2000. During installation and operation, the user must have
sufficient electrical contact to earth. Electrostatic charges might affect
strain relief clamp
tip
(ground/shield)
tip
Fig. 4.1: ¼' mono plug
sleeve
tip
ground/shield
ring and sleeve have to be bridged at the stereo plug.
ring
tip
Fig. 4.2: ¼' stereo plug
For unbalanced use, pin 1 and pin 3 have to be bridged
2 = hot (+ve)
input
3
12
Fig. 4.3: XLR connectors
sleeve
sleeve
tip
The footswitch connects both poles momentarily
Fig. 4.4: ¼' TS connector for footswitch
4.4 Loudspeaker connections
Your EUROPOWER is equipped with high-quality Neutrik Speakon-compatible
loudspeaker connectors, which ensure safe and trouble-free operation.
TheSpeakon connector was especially developed for high-power loudspeakers.
Once it is plugged in, it safely locks into position and cannot be accidentally
disengaged. It prevents the occurrence of electrical shock and ensures the
correct polarity. Each of the connectors carries only the assigned single signal
(see tab. 4.1/ g. 4.6 and the information on the rear panel of the power mixer).
2-
1+
2+
front viewrear view
(compatible with Neutrik Speakon connectors)
Please be sure to only use commercial Speakon cables (type NL4FC)
forconnecting your loudspeakers to the PMP2000. Please check the pin
assignment of your loudspeakers and cables dependent on the PMP2000 speaker
1+ 1- 2+ 2-
LEFT/MONITOR POS NEG — —
Tab. 4.1: Polarity conguration of speaker connectors
+1
16 Ω
LEFT/MONITOR
-1
8 Ω
+1
8 Ω
RIGHT MONO MAIN
Fig. 4.6: PMP2000 loudspeaker connector assignment
Loudspeaker connection (FOH mix)
rear panel
2 x BEHRINGER EUROLIVE
Loudspeaker connection (monitor mix)
2 x BEHRINGER B300 (active)
Fig. 5.1: PMP2000 as stereo amplier (example)
◊ Please set the MODE switch (21) to “LEFT/RIGHT” for this application.
and mono monitor mixes
rear panel
2 x BEHRINGER
2 x BEHRINGER
(passive)
Fig. 5.2: PMP2000 as double mono amplier (example)
◊ For this application, however, please set the MODE switch (21) to
EUROPOWER PMP2000
Stereo channel 7/8
Vocal
guitar
V-AMP 3
Electric bass
channel 5
channel 6
channels
Fig. 5.3: Standard setup (example)
Mono Inputs
Type XLR, electronically balanced,
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ω source resistance -122 dB / 125 dB A-weighted
@ 50 Ω source resistance -122 dB / 125 dB A-weighted
@ 150 Ω source resistance -121 dB / 124 dB A-weighted
<10 Hz - >200 kHz (-3 dB)
Max. input level +12 dBu @ +8 dB gain

Behringer Pmp3000 Powered Mixer

approx. 1.1 kΩ unbalanced
(-11 dBu In @ +33 dB gain)
Mono Line Inputs
Impedance approx. 80 kΩ balanced,
Max. input level 30 dBu
Type ¼' TRS connector, unbalanced
Max. input level +28 dBu
Low 60 Hz / ±15 dB
High 6 kHz / ±15 dB
Type ¼' TRS connector, unbalanced
Max. output level +21 dBu
Type ¼' TRS connector, unbalanced
Max. input level +21 dBu
Monitor Output
Impedance 1.5 kΩ
DSP 24-bit Texas Instruments
64/128-times oversampling
Main Mix System Data1
Main mix @ -∞, -76 dB / -80 dB A-weighted
Main mix @ 0 dB, -72 dB / -76 dB A-weighted
Main Mix @ 0 dB, -71 dB / -75 dB A-weighted
Power Amp Speci cations
8 Ω per channel 165 W
RMS @ 1% THD (Sine Wave), Bridged Mode:
Peak Power, Both Channels Driven
4 Ω per channel 350 W
8 Ω 800 W
Loudspeaker connector Professional speaker con nectors
Load Impedance
Right/mono main 4/8/16 Ω
Power Supply
USA/Canada 120 V~, 60 Hz
Europe/U.K./Australia 230 V~, 50 Hz
China/Korea 220 V~, 50/60 Hz

Behringer Europower Pmp3000

Japan 100 V~, 50 – 60 Hz
General export model 230 V~, 50 Hz
120 V~, 60 Hz
Power consumption max. 1 kW
Dimensions/Weight
Dimensions (H x W x D) approx. 11 x 18 ⁄ x 10 ⁄'
Weight (net) approx. 30.9 lbs / 14 kg
1: 20 Hz - 20kHz; measured at preamp output. All channels: level controls in center position; EQ flat.
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these eff orts,
modifi cations may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
FEDERAL COMMUNICATIONS
INFORMATION
Responsible Party Name: MUSIC Group Services US Inc.
Suite 200 Bothell, WA 98011,
Phone/Fax No.: Phone: +1 425 672 0816
EUROPOWER PMP2000
complies with the FCC rules as mentioned in the followingparagraph:
This equipment has been tested and found to comply with the limits for a ClassB
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause

Europower Pmp3000 Mixer Aux Sends

harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the followingmeasures:
• Increase the separation between the equipment and receiver.

Behringer Europower Pmp3000 Powered Mixer Manual

• Connect the equipment into an outlet on a circuit dierent from that to which the
• Consult the dealer or an experienced radio/TV technician forhelp.
This device complies with Part 15 of the FCC rules. Operation is subject to the

Music Mixer Manual

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
Important information:
Changes or modications to the equipment not expressly approved by MUSIC Group
can void the user’s authority to use the equipment.